View Single Post
Old 05-29-2018, 04:39 PM   #2
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
Default Re: RXV-E, no power to read my handheld

Quote:
Originally Posted by Michael Reese View Post
I have a 2008 EZGO RXV electric golf cart that suddenly stopped running. Pulled the plug under the dash and hooked my hand held programmer to it and it doesn't have any power to light it up. Battery pack is at 50.8 volts. Checked all connections and they are tight. Has a new electric brake, solenoid and key switch. Is it the controller or you think it's another problem. Thanks in advance.
Check the fuse that feeds power to the keyswitch. Remove the plastic cover (that the run/tow switch is in) and look under the cap that is not labelled #1, #2, #3, or #4. On a 2008 there should only be one. It should be a 7.5A automotive style blade fuse. You can use a 10A fuse there if you need to.
BobBoyce is offline   Reply With Quote