Re: New solenoid - no click, new batteries, new tow/run switch
I found this cool check list for pin voltages on controller - will follow and maybe rule out/ or most likely in :( the controller as the culprit. I checked all the switches ( on/off, forward/reverse, tow/run, stop switch - could unfortunately not get throttle control switch apart to check it) and everything I was able to check showed resistance/continuity where expected.
So, now I am off to checklist - rats, member not long enough to post link - but if someone googles, you might find it under this info: fsip.biz/Documents/Yamaha%20G22%20with%20GE%20262Y1%20Control.pdf
|