Buggies Gone Wild Golf Cart Forum - View Single Post - 2006 Club Car Precedent Turn/Brake Light Issue

jancelet · 09-17-2019, 02:33 PM

Right after the 12pin connector (dash going to back), with Running Lights ON, i get 2V on White (Drivers side back light) and 5V on Yellow (Passengers side back light), and when brake pedal is activated, Drivers side white goes to 12V BUT Passenger side yellow stays at 5V. Hence the problem.

So when Brake Pedal is ACTIVATED at what point is the new 12V splitting up into the YELLOW and WHITE Wires (since that must be the problem point)?

MADJAX says that I need a new LED Turn Signal Kit that the board in it is bad, yet the KIT i have was before they even made LED kits and the brake lights work on that side as long as you dont engage the light switch,

09-17-2019, 02:33 PM	#8
jancelet Not Yet Wild Join Date: Sep 2019 Posts: 8	Re: 2006 Club Car Precedent Turn/Brake Light Issue Right after the 12pin connector (dash going to back), with Running Lights ON, i get 2V on White (Drivers side back light) and 5V on Yellow (Passengers side back light), and when brake pedal is activated, Drivers side white goes to 12V BUT Passenger side yellow stays at 5V. Hence the problem. So when Brake Pedal is ACTIVATED at what point is the new 12V splitting up into the YELLOW and WHITE Wires (since that must be the problem point)? MADJAX says that I need a new LED Turn Signal Kit that the board in it is bad, yet the KIT i have was before they even made LED kits and the brake lights work on that side as long as you dont engage the light switch,
jancelet Not Yet Wild Join Date: Sep 2019 Posts: 8