Re: Help w/ Jakes long travel Yamaha Drive
Thank you for the response and assistance. The shock is mounted correctly by instructions but not sure they are correct for this cart. The springs are really close to A arms if not touching slightly. Flipping them might help with that. I would need to compress a little over 2 inches to get in the lower hole. Only two hole choices, upper and lower. All instructions and videos show it mounted in lower hole for 6” lift. I’m afraid if I compress to fit in lower hole it’s going to limit travel during use and put excessive pressure on heim joints and tie rod end at full extension. Not sure if I’m correct about that but seems so.
Sent from my iPhone using Tapatalk
|