Quote:
Originally Posted by capitalst
Thanks for playing around with this and finding a great solution to making these carts go a bit faster. I would like to bump up the speed closer to 35 mph. I think anything past that is pushing the safety issue. Good part is I have the DOT approved Steel belt tires more meant for higher speed vs standard tires. At 30 mph right now it is pretty stable vs the stock ones.
How do I go about getting the software to change the RPM's on the controller?
|
For the immediate time being, your best bet is talking to your dealer. I'm in a trusted position and I'm still learning a bunch of valuable info that I can't risk. I've decompiled the software and I'm trying to see if I can pull out just the "read/write" bits that I could possibly release.
A related interesting bit, in the controller/software, it accepts 2 RPM settings (low/high). Think turtle/rabbit on a law mower.
These are switched by pin #2 from the umbilical. So you can program 7000 (rabbit ~35mph) and 5000 (turtle ~25mph) and have a physical valet key that toggles between the two.