View Single Post
Old 03-24-2015, 01:58 PM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
Default Re: Serial a9741-613102 no click 48v after market part

See if you are getting 48 v positive (+) power to the controller pin #1 when the solenoid clicks.
Then check the throttle signal- remove wires from pins 2 & 3 and plug ohm meter in then press the gas. What is the full range of this test?
Post make and model # of the control. Alos any other info printed on it like voltage or amperage.


Nvrmnd - Multiple threads on the same problem is a problem.
scottyb is offline   Reply With Quote