Buggies Gone Wild Golf Cart Forum - View Single Post - where to land the motor leads terminals not marked

Volt_Ampere · 05-12-2016, 05:29 PM

You need to determine which terminals are Armature and which are Field. Then you can wire it correctly. At least figure out with an ohmmeter which terminal is paired with which. You will read continuity between the pairs but not between them.

05-12-2016, 05:29 PM	#2
Volt_Ampere Gone Wild Join Date: May 2012 Location: Rio Verde, Az Posts: 7,170	Re: where to land the motor leads terminals not marked You need to determine which terminals are Armature and which are Field. Then you can wire it correctly. At least figure out with an ohmmeter which terminal is paired with which. You will read continuity between the pairs but not between them.