Re: Charging Issue
ok here's an update....after checking the cables, batts, and other wiring using a meter and even each individual battery to make sure I didn't have a bad one, it turns out to be the state of charge meter that is fried!
It's a curtis LED model, after searching through some of the sponsors it's about 50-75$. Which seems rather steep for a board and a few diodes! But found a more analog version for cheaper that I will get to put on there. Not to mention to start having the charger on the cart till I get the charge meter replaced.
Still can't wait to upgrade the cart, but Will be placing an order at ScottyB's here soon for the controller pkg.
|