View Single Post
Old 09-05-2018, 10:07 AM   #10
beachguysc
Getting Wild
 
beachguysc's Avatar
Club Car
 
Join Date: May 2018
Location: MB SC
Posts: 112
Default Re: Alltrax Absolute Throttle

I have a mcor 4 upgrade on my 2008 precedent IQ with Alltrax 400. The cart recently started cutting out when the pedal is pressed hard to the floor. I was told it is from the pedal being worn and going past the 100% mark and starting over. I hooked the Alltrax software and indeed the power drips from 100% and jumps to 40 or 60 or 80% when pushed just a little further than lightly touching the floor. The obvious and easy fix is to not push the pedal past lightly touching the floor. But in the real world, going over bumps pushes my foot down more and Power cuts out instantly. I tried putting something thin behind the pedal, but then I have to constantly push hard to keep 100% and that gets old. Would any of these methods of altering throttle or acceleration curves within the Alltrax software help me fix this issue? Thanks
beachguysc is offline   Reply With Quote