Buggies Gone Wild Golf Cart Forum - View Single Post

fishb8 · 03-03-2013, 01:08 PM

NOW, Key switch ON, gear selector in FORWARD, Place the (+) probe on the battery side of the solenoid's large post (If the reading is below battery voltage, check all wiring and terminals).
50.4v which is the same as the battery pack

Place the (+) probe to the controller side of the solenoid's large post. The reading should be 0.1 to 3 volts less than battery voltage. If the reading is more than 3 volts less the battery voltage, the resistor is faulty. If the voltage is the same as the battery voltage, replace the solenoid.
47.0v. So it is 3.4v lower.
It seems that the resistor is faulty, but with the high pitch noise, I wondering if it could be something else.

03-03-2013, 01:08 PM	#2
fishb8 Gone Wild Join Date: Nov 2010 Location: Charleston, SC Posts: 539	Re: FnR switch high pitch noise NOW, Key switch ON, gear selector in FORWARD, Place the (+) probe on the battery side of the solenoid's large post (If the reading is below battery voltage, check all wiring and terminals). 50.4v which is the same as the battery pack Place the (+) probe to the controller side of the solenoid's large post. The reading should be 0.1 to 3 volts less than battery voltage. If the reading is more than 3 volts less the battery voltage, the resistor is faulty. If the voltage is the same as the battery voltage, replace the solenoid. 47.0v. So it is 3.4v lower. It seems that the resistor is faulty, but with the high pitch noise, I wondering if it could be something else.