View Single Post
Old 10-10-2019, 08:59 PM   #4
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: 2010 Precedent not doing anything!

But the OBC being in Lockout would not create current flow thru the Pre-Charge resistor. There is a high demand being drawn to the controller or motor resulting in the amperage overcoming the resistor, thus heating it up. First, go back and verify both termination points of every cable to be installed correctly in the right place.

If so, then you need to test the motor for a ground. (can post instructions if you need it)
NoleFan4Ever is offline   Reply With Quote