View Single Post
Old 10-10-2009, 12:58 AM   #10
odins701
Not Yet Wild
 
odins701's Avatar
E-Z-GO
 
Join Date: Oct 2009
Location: Virginia Beach, VA
Posts: 62
Default Re: Electric Ezgo Battery Charge (Batteries or controller?)

Quote:
Originally Posted by aforsberg View Post
Amazingly enough I have been told its a controller, but I have attached a photo of it just incase someone needs to correct me

I just tried to figure out how it is wired and I had to walk away. When I followed the wires from the battery the + Went to the solenoid, and the negitive went to the controller.. from there I am lost. LOL

Also, I don't believe it is the batteries becasue I swapped the 2 of the 6volters with my new charged up 12v Deep cell and it still didnt go unless i pushed it.

Any Ideas? Could the controller be slowly going bad?

Thanks so much guys
on the controller there is 3 small wire plugged in, with the power off unplug the black and white wires and read the resistance thru them, slowly pushing the petel watch the resistance change. you should get 0-6K ohms. lets us know what you get.
Had a chance to read some voltages yet?
odins701 is offline   Reply With Quote