Quote:
Originally Posted by Northern Tool Man
Sir Nuke did you run your current system on the stock motor before you changed to your current? Trying to get an idea about torque loss or gain. If I could keep the current torque and gain speeds to 30mph I think I found my motor. What RPM are you topping out at? According to my calculations you should be turning around 5500 RPM.
|
yes I did run it with the stock motor for a short time, ACTUALLY I ran it at 36v for a while....then upgraded to 48v.....so there was a huge difference from a stock motor at 36v to my RAPTOR (7126) at 48v......I could feel the difference between the 7126 from 36v to 48v as well.
remember....when you go from 36v to 48v with the only change being voltage, you gain roughly 33% more torque and speed.