Quote:
Originally Posted by Northern Tool Man
Guys i need a little assistance. I have a 2007 Ezgo TXT that I have switched to a 48V cart. I have added The Alltrax SR48500 Controller, 400AMP Solenoid and solenoid forward and reverse. I am still running the stock AMD AO2-4012 motor. It is getting up to 19mph on a full charge. Looking to replace the final peace, the motor. I would like to be able to get 25mph. i have been looking at the D&D 13-1 and the AMD 7124. Just curious if anyone is running this set up with either of these motors and what kind of results they are getting. I am running 23" tires and have a back seat on the cart with a 6" lift. from my calculations either motor would have to be running 4600 RPM to achieve 25mph. Will either of these motors be able of doing that with the load i have on my cart?
|
As Kernal mentioned....and as you can see in my sig the spec's of my cart....and its what you have minus your current motor. one thing to keep in mind is that where I live its TOTALLY flat....no hills at all, but if where you primarily use your cart is fairly flat you would have the same performance as mine. I do go "off road" at times but its just established trails, so that's pretty much the same as the street. the 7124 will get you a little more torque/less speed, but I don't know how much. All I know is with my application, I love my RAPTOR (7126)….AND MY WHOLE BUILD HAS BEED 100% TROUBLE FREE for the 6-1/2 yrs I have had it.