Thread: Bearing ?
View Single Post
Old 08-27-2010, 12:30 PM   #4
COURTESYCART
Gone Wild
 
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
Default Re: Bearing ?

ezgo part number -- 73120g07. Runs about $20.00.

It will take you longer to get the motor off than it will to replace that bearing. You will have to fully disasemble the motor. It not bad. Just 2 8mm bolts and it comes apart. I usally press the armature out of the bearing, but you can do it with a hammer if you are gentle. I have done it both ways. Just have to be careful when you reasemble that you dont damage teh brushes, but it not hard to get the brushes started over the armature. you will see when you take it apart what i am talking about.

There is a snap ring that holds the bearing in the rear housing.
COURTESYCART is offline   Reply With Quote