Buggies Gone Wild Golf Cart Forum - View Single Post - Diode energized both sides, but no continuity

sonofagunn · 10-10-2018, 05:47 PM

I was testing my diode, and after removing the resistor and diode, I still get 50 volts between the battery negative and each side of the solenoid. I was expecting the side of the solenoid going to the controller to be 0 volts.

Solenoid still clicks when the gas pedal is depressed. There is no continuity between the 2 large solenoid posts.

10-10-2018, 05:47 PM	#1
sonofagunn Getting Wild Join Date: Sep 2018 Location: Palm Harbor, FL Posts: 86	Diode energized both sides, but no continuity I was testing my diode, and after removing the resistor and diode, I still get 50 volts between the battery negative and each side of the solenoid. I was expecting the side of the solenoid going to the controller to be 0 volts. Solenoid still clicks when the gas pedal is depressed. There is no continuity between the 2 large solenoid posts.