Re: Hears motor trying to run 1998 ez go
Thank you everyone for the information. After doing some looking and testing, I found the axle to be fine and the splines as well. The problem was a battery cable connection was the problem. The cable looked fine on the outside while the inside of the cable was bad. I put a new cable on and it runs like a champ.
I really thought the problem was in the rear end, since the sound was coming from there, I assume it was getting enough voltage to turn the motor but not enough really let it run properly, making it inch along, under the weight of the cart.
One again I would not have found out this without friendly advise.
Thanks.
|