View Single Post
Old 10-10-2019, 10:50 PM   #6
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: 2010 Precedent not doing anything!

That sounds better if the resistor is not getting hot now.

You should have continuity between F1/F2, A1/A2, but not either F to either A and not any to the case.

If you rotate the motor you will probably get it back on the A1/A2.

Presuming your controller is correct for your cart, then unplug the 6-pin connector at the OBC. On the carts' side harness (not the OBC side), take a paperclip and install it as a jumper between the Blue wire and the White wire. This will bypass the lockout circuit of the OBC.

Report back what happens.
NoleFan4Ever is offline   Reply With Quote