Originally Posted by TahoeDawgZ71

Take the rear end out of the car. Take the passenger side tire off of the rear end. Take brake drum off. Flip brake drum around backwards and tighten lug nuts to where they are snug enough to hold the drum to the axle. Don't torque them down. With the aid of an assistant, lift the rear end up 3 - 4 feet into the air and drop the rear end onto a concrete floor onto the inverted brake drum. The drum is inverted so you don't damage the wheel studs during this process. The motor will fall off as soon as it hits the ground. If it doesn't, try it again. I've never had to drop one more than three times. Don't laugh. Try it and thank me later.