Quote:
Originally Posted by Allmanac
Most factory stock springs are single leaf.
|
while you are installing the dual action springs go ahead and get you some 2 inch spring liners off ebay and cut them to length and place them between each spring/leaf ,replace the spring bushings and grease well with synthetic wheel bearing grease or silicone grease and you will have no squeaks at all from the rear of the cart ...I just did this and its stealthy quiet now .sure beats spraying it down all time with some type of spray lube and hoping for the best ...my dual action springs are redhawk but they squeaked until I installed the spring liners ...while you're at it file down the edges on the leafs where they make contact with the other leafs at the ends if you want to really do it right the first time