View Single Post
Old 06-12-2019, 06:43 PM   #1
93fs
Not Yet Wild
 
Join Date: May 2018
Posts: 5
Default jakes double arm g9 lift steering

finally got the new lift on my g9. install was pretty straight forward beyond one of my tie rods being completely seized, but got that replaced and got it aligned about as close as i think i can get it with a tape measure, however now my turning radius is pretty bad (super wide) its livable but is it normal? wheels are 10x8 and tires are 22x11x10 id think having larger tires would possibly hurt the radius but i wouldnt think itd be that noticable. only thing weird i can see watching the steering itself, is when its turned to "lock" one side just stops, then the other turns another 1/2" or so and then stops when it touches the lower a arm. this is the same on both sides just opposite. it appears to just be the balljoints allowing the tierod to move a little which lets one wheel turn a little further. again not sure if this is normal or not, i didnt ever really watch it when the cart was stock

edit: not sure why the pics went sideways










'
Attached Images
File Type: jpg IMG_5716.jpg (192.9 KB, 0 views)
File Type: jpg IMG_5717.jpg (204.1 KB, 0 views)

Last edited by 93fs; 06-12-2019 at 06:45 PM.. Reason: pics sideways
93fs is offline   Reply With Quote