View Single Post
Old 04-07-2019, 07:18 PM   #1
envoy98
Not Yet Wild
E-Z-GO
 
Join Date: Jul 2017
Location: Otsego, MN
Posts: 19
Default Debugging 2006 ezgo txt electrical aka cart won’t go

Batteries are charged. 36.7v at the moment.
Key switch is good and shows Same voltage when on.
F/R switch is where I’m confused. Center pin shows 1.5v when in neutral. When I move to f or r I have .29v on the two pins. Is that drop expected? Sure seems suspect. Solenoid is not clicking at all. I tested voltage on the battery side and it’s 36.7v. 36.2v on the controller side.

I’ve been going through the ezgo troubleshooting on carts unlimited and this is where I’m at now. I’d appreciate any help or suggestions if you have them.
envoy98 is offline   Reply With Quote