View Single Post
Old 03-04-2019, 12:35 AM   #8
champkitty
Not Yet Wild
 
Join Date: Jan 2014
Posts: 3
Default Re: wiring a reverse light to the reverse buzzer?

On the Club Car, behind the FWD_REV switch, there are 3 limit switches.

The middle one controls the reverse buzzer switch. There are 2 wires going to this switch.

Using the ground wire from the light, go to one of the wires to the limit switch and connect to that wire.
Connect another wire from the other wire of the limit switch to ground.

Use a 12V source to the power wire of the light.

When you put the cart into Reverse, both the light and the buzzer will go on.
champkitty is offline   Reply With Quote