View Single Post
Old 11-19-2010, 07:41 PM   #4
roady89
nimda
Club Car
 
Join Date: Jun 2007
Posts: 13,022
Default Re: G14 motor problem?

Take the volt meter and put it on continuity. Check for continuity between the A terminals and the S terminals. The A's are a pair so they will between themselves, same for the S's. Then check for continuity between the terminals and the motor housing. If you got continuity then you have a short. If you suspect it's slipping then the motor will have to come off. Either the motor coupler will strip or the input shaft, or both.
roady89 is offline   Reply With Quote