View Single Post
Old 04-14-2016, 10:19 AM   #5
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: Alltrax SR controller install

The OEM solenoid bracket will work for the SR400 and 200 solenoid.
For the SR500 and 400 solenoid I'm using the Alltrax solenoid bracket designed specifically for the 400 solenoid and taller profile SR500. The fan adds a little height.

For controller set up I plugged it into the laptop with usb1 to usb2 cable below. Update software version 2.1.8 is needed if you have the original version, available at Alltraxinc.com
My control came set for 0-5k throttle, this is the default setting. My cart is Ezgo ITS. I had to go into tools and enable throttle selections. Once that was done throttle selection was simple from a drop down menu.

I will be programming each control before they ship.
I can set throttle selection for you is you let me know what you need.
Attached Images
File Type: jpg usb1_usb2.jpg (22.6 KB, 0 views)
scottyb is offline   Reply With Quote