Quote:
Originally Posted by FIXEROFCARTS
You can adjust the Accel. pedal to increase travel, if the MCOR is not going to full position.
Under the car, look at the accel pedal, there is a 9/16 nut and bolt on the accel. pedal on a slotted rod, loosen the nut and bolt, slightly move the pedal in desired direction, and retighten, 2 minutes and your done.
I always question when a shop adjusts brakes, if it is like shops around here, they just tighten the cable and call it good. Hard brake pedal, with little braking power. So you may still want to look at that.
|
Thanks Fixer....I will definitely give the crawl on the pedal adj....And as a matter of fact, the 'Hard brake pedal with little brake power IS what I seem to have now as well...I'll have to look at this as well
?
I doubt I'll have a shop do any more that I can't handle; I have done this rebuild myself but ran into one MCOR I didn't have ability to handle, so had them do a small list of little things I should have done myself...live and learn I guess
