Re: Interest in possible Curtis AC Conversion
I just finished installing a 36V 400A 1236 into a Tomberlin E-Merge. I still need to get the motor tuned in but up on jacks, unloaded I was getting around 6000RPM, on the ground I was running about 4000. I think the gearing on this cart is 10:1 so that puts me at about 20mph. The controller allows a max of 8,000RPM but I doubt that'll be happening at this voltage.
Its also installed a turf switch to work with the VCL I wrote. In conjunction with a handset it has 4 modes that can be set to the two switch positions. I set it up similarly to a EZGO TXT with a 1206HB.
Airport limited to about 10mph
Speed limited to 20mph
Freedom limited to max limit of the control
Torque which maintains a torque value rather than an RPM.
The speeds in each of these modes is also adjustable between 0 and the limit.
So far it seems rather impressive for a low voltage cart.
|