[raydhd]

For those who want something that get to a 5600 rpm red line in a very short distance even with 24" tires or high speed gears. You start with Vegacarts 460 assemble it yourself kit $399 delivered to your door.ADD from NRracing his $130 1.3 ratio shaft mounted roller rockers,$45 adjustable main jet. You could stop there and dent up your stock valve cover but I would recommend spending another $58 for the whole billet valve cover kit. So at this point your grand total is $633. I assure you just putting these parts together you will have a real screamer. BUT before you put that head together why not break out the dremel like tool and clean up the bumps and rough areas in both ports and also clean up the valve pockets below the seats. Then depending on your cart find a high flow air cleaner that fits. Set both the idle and main jets at 1.5 turns and you should be ready for your final adjustments. Take it easy for the first couple of tanks of gas and do 20 min, 1 hour, and 10 hour oil changes. And from then on drive it like you stole it. ENJOY P.S. You should spend the $'s for a decent tach since this thing will want to blow past the 5600 rpm and 45 mph. P.P.S Also remember not to stomp on the gas like your stocker or you might get hurt.