Re: 18hp Cushman Haulster ('77) - rough runner
Hi Charley -
I was hoping you'd show up... I've been reading up on your tips throughout the forum.
Fuel filter, will move it accordingly. The old bypass one was discarded and replaced.
Brakes, I already replaced one cylinder that was completely shot. Will eventually replace lines, but system is bled and working. Hmm, will check to make sure master cylinder has vented cap, I am guessing it's original, but who knows?
Fuel cap is original one, seems to work ok. Innards ok, outside was spray painted.
Carbs, will look for that inlet filter. I didn't see one when I cleaned them, but will double-check.
Valves, will do next. Very good to know I can upgrade by replacing cylinders.
Manual downloaded!
QUESTION - how to I adjust clutch / clutch pedal? I tried adjusting at yoke, didn't seem to make a difference.
Will post results after I do all this.
Thanks much!
|