View Single Post
Old 01-26-2014, 10:54 PM   #5
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
Default Re: G1 not turning over

Man, not sure where to have you start. Look at all of your wires for loose connections or broken/cut wires. If there's nothing suspect, get your voltmeter/test light out. At your coil, you should have power on one lead, ground on the other. If you do, you can check for spark off the coil. If no spark, it's either the coil is bad, or the magneto. Sometimes the CDI can be bad, but deal with that last because they are not cheap. Usually it's a bad wire, bad ground, or bad coil.
slonomo is offline   Reply With Quote