View Single Post
Old 04-14-2016, 10:14 AM   #4
scottyb
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 70,522
Default Re: Alltrax SR controller install

I was pleased to see the control bolt in with 4 fasteners onto the OEM heat sink. The SR control has an integrated heat sink and fan so it can be mounted any where there is a supply of fresh air without heat problems.
It's a nice fit with lots of room to work, I like that. I was disappointed I have to source my own 4 bolts to mount it. I used 1.5 inch 1/4-20 bolts. Careful tightening these up, the controller base is plastic. Good & Snug is my suggestion. I got all 4 bolts started for alignment, then snugged the top 2 and removed the bottom 2 for the solenoid bracket.
Attached Images
File Type: jpg 64ce416e-6c6e-4a37-9292-6ffcd62a22ca.jpg (48.8 KB, 0 views)
scottyb is offline   Reply With Quote