View Single Post
Old 07-11-2018, 12:43 AM   #3
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: Cart Slowly Shutters After Controller/Motor/Cable/Solenoid Upgrade

Hey Sergio, I talked to Ron Manns (Alltrax Technical Service Manager) on Monday about this very same thing and he told me that the diode on the coil was needed and that the manual and drawing reflects it correctly. I told him I would follow up with an email so I could share it. (see the attached email and also their drawing revised/updated 4-17-18 )

Sethmc, as Sergio stated, your coil suppression diode is backwards and needs to be reversed. It appears from your pic that the Regen diode between the large posts is also backwards and needs to be reversed. Look at the attached drawing; the Regen diode's silver band should go towards the same post the Main Pack Pos (+) cable is connected to. Looks like yours ~might be towards the post for the controller side cable. This would be depicted as #5 on the drawing.

The suppression diode is depicted as #1 on the drawing.

Coil Diode Email.jpg
Attached Files
File Type: pdf XCT CLUBCAR IQ WIRE DIA.pdf (135.7 KB, 0 views)
NoleFan4Ever is offline   Reply With Quote