Quote:
Originally Posted by rngilliland
Since the solenoid is burning up, make sure you have the correct one. Ezgo part #609428. It is a Trombetta 36 volt solenoid rated for continuous duty. It is a 36 volt solenoid which is correct for a 2008 RXV. Your cart may have originally had a solenoid hard wired in the harness and been converted to a separate one.
The solenoid should have a small black wire to one of the small terminals and a small red wire to the other small terminal. If it was converted from the hard wired solenoid both of the wires may be black. One large terminal should have the B+ wire from the battery and a small yellow wire. The other large terminal should be connected to the B+ terminal on the controller and a ten gauge white wire from the resistor.
|
Thanks! I will check this out in the morning!