View Single Post
Old 11-15-2019, 06:35 PM   #4
rngilliland
Gone Wild
 
Join Date: Feb 2016
Posts: 229
Default Re: 2008 RXV Solenoid and Motorbrake keeping burning out PLEASE HELP

Since the solenoid is burning up, make sure you have the correct one. Ezgo part #609428. It is a Trombetta 36 volt solenoid rated for continuous duty. It is a 36 volt solenoid which is correct for a 2008 RXV. Your cart may have originally had a solenoid hard wired in the harness and been converted to a separate one.

The solenoid should have a small black wire to one of the small terminals and a small red wire to the other small terminal. If it was converted from the hard wired solenoid both of the wires may be black. One large terminal should have the B+ wire from the battery and a small yellow wire. The other large terminal should be connected to the B+ terminal on the controller and a ten gauge white wire from the resistor.
rngilliland is offline   Reply With Quote