Buggies Gone Wild Golf Cart Forum - View Single Post

Sergio · 10-01-2019, 10:50 AM

The Controller also needs to see throttle input before it will activate the Solenoid.

To test the Throttle signal, set the meter to 20vDC and place the meter negative probe on pack negative battery post.

Put the meter positive probe on Pin 2 - Yellow wire.

The voltage should range from around 0.3v with the pedal UP to more than 4.65v with the pedal all the way DOWN.

10-01-2019, 10:50 AM	#9
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: Solenoid not engaging The Controller also needs to see throttle input before it will activate the Solenoid. To test the Throttle signal, set the meter to 20vDC and place the meter negative probe on pack negative battery post. Put the meter positive probe on Pin 2 - Yellow wire. The voltage should range from around 0.3v with the pedal UP to more than 4.65v with the pedal all the way DOWN.