View Single Post
Old 09-30-2019, 05:25 PM   #6
Goober11
Gone Wild
 
Goober11's Avatar
Club Car
 
Join Date: Jun 2018
Location: Richmond,Virginia
Posts: 547
Default Re: Solenoid not engaging

Quote:
Originally Posted by NoleFan4Ever View Post
You did not check the 48- (Blue w/White wire) and I suspect that is your problem since the solenoid did engage when you jumped out the terminals directly from the battery.

(One wheel jacked up) Get your DVM and place the Black probe on the pack Neg and then with the key On, cart in Fwd, and Go Pedal depressed far enough to hear the microswitch click, take the Red probe and check to see if you have pack voltage in the following pins at the controller: Pin 5 - Lgt Blue must be >30v, Pin 6 - Green, Pin 8 - Brown, Pin 9 - Grey, and Pin 10 - Tan.
Thanks NoleFan I will test in the am. Grandson has football practice and he needs a ride.
Goober11 is offline   Reply With Quote