View Single Post
Old 09-30-2019, 04:56 PM   #5
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: Solenoid not engaging

You did not check the 48- (Blue w/White wire) and I suspect that is your problem since the solenoid did engage when you jumped out the terminals directly from the battery.

(One wheel jacked up) Get your DVM and place the Black probe on the pack Neg and then with the key On, cart in Fwd, and Go Pedal depressed far enough to hear the microswitch click, take the Red probe and check to see if you have pack voltage in the following pins at the controller: Pin 5 - Lgt Blue must be >30v, Pin 6 - Green, Pin 8 - Brown, Pin 9 - Grey, and Pin 10 - Tan.
NoleFan4Ever is offline   Reply With Quote