Quote:
Originally Posted by HaulnA$$
You have a problem with the throttle. The 1/2 speed reverse switch puts a resistor in parallel with the throttle to limit it to 1/2 speed. By manually engaging the switch when in forward, you are giving the controller a 1/2 speed throttle input where there was none from the throttle. Inspect the throttle and I’m sure you will find the issue.
|
Thanks, I'll check that this afternoon, but I'm thinking it's the forward side of that micro switch, because the throttle works in reverse and in forward when the micro switch is flipped to reverse while the lever is in forward.
Sent from my SM-G930R4 using Tapatalk