Re: 95 DS 48 volt micro switch 3 question
After studying the wiring diagram, I think I have figured it out. I had figured it had something to do with the half speed reverse, but didn't know how it worked. That's a resistor that controls the half speed reverse by resisting the throttle input voltage. I'm guessing the micro switch is intermittently failing when it doesn't run in forward, but will run when I manually engage the switch, it runs because the throttle signal then goes through the reverse side. Failing micro switch. Am I close, or way off base?
Sent from my SM-G930R4 using Tapatalk
|