Quote:
Originally Posted by krhonn
I stick my hand over the carb and it seems that my hand is covered in fuel in no time.
|
Two things this makes me think of are:
1 - Is the oil injection removed? If so, is the hole where the banjo bolt from the oil tank plugged with another bolt? Although the plug may look wet, you could be getting too much air in there, and have fuel coming through the hole.
2 - Is the float in the fuel bell hooked up correctly? The pin for the float can fall out pretty easily during assembly, leaving the float not shutting off the fuel inflow. When this happens, the cart will run for a bit until the bell overflows, and releaves excess fuel through a bolt above it
Just a couple of thoughts I had, based on both of the above things happen to me......
Grrrrrr.