Re: 98 gas ezgo voltage issue
Figured out the issue due to pure stubbornness. With meter on battery side of solenoid. 12 volts as normal. Turn on key and press pedal. Meter still on battery side of solenoid. No voltage. I’m thinking bad ground somewhere as everything else checks out. Get battery charger and put neg to batt and positive to batt side of solenoid. Put it on boost and push the pedal. Darn thing fires. Run jumper from batt + to batt side of solenoid and away she goes. End of the day the wire from batt+ to solenoid had too much corrosion that it would crap out when under load. Change cable and ready to rock
|