[fender6l6]

Ok here's what I got.I replaced the stock gears in 2009 EZGO RXV (16.99-1) with a set of gears from a Jacobsen Eclipse 322 48Volt greens mower (19.63-1).The only difference in the gears is double gear that connects the motor shaft gear with the ring gear.The stock gear had 58 teeth and the new gear had 67 teeth.They booth had the same ring gear (large gear) teeth at 116 and the small gear at 22 teeth.The end result was 20 revolutions of the motor spline gear with 1 full revolution of the large ring gear.My research worked.Cart has original torque and speed and at stock program setting.I plan on turning up the programmer to max soon.I contacted an Ebay seller of used Jacobsen parts and he graciously took the time to find me the gears off a used mower. However I think an even lower ratio of like 22-1 would be more ideal for the RXV especially with the available speed. So everyone put the pressure on Nivel to get with there engineers and machine up some gears!