Quote:
Originally Posted by cgtech
Also, if you touched the keyswitch to activate your lights, you may need more than a handheld.
A 2013 should be a Curtis model Rxv. Verify yours is a Curtis Rxv. Search for Curtis Rxv troubleshooting guide. It is written with a handheld in mind, but has lots of tests to do with a Voltmeter.
|
Okay, using the right search terms helped a lot. Thank you for the nudge in the right direction. I found the guide here and will reference that tomorrow when I work on it again.
http://www.buggiesgonewild.com/elect...ing-guide.html
What do you mean about the key Switch? I used a factory harness light kit to avoid the wiring issues that you have mentioned elsewhere. There was an aftermarket kit that I uninstalled but I it has ran for months since I have done that. I did replace the key switch with a new “unique key switch” since I’m in a town where carts sometimes get stolen. But again, all factory parts.