Buggies Gone Wild Golf Cart Forum - View Single Post

devon · 09-26-2012, 07:30 PM

ok, big time help needed this time guys. i have an 83 ezgo with a 244 robins. i seized the bearing in the jug (clutch side) and have no good idea on how to "beat" the jug off the crank. nothing moves and already have the motor tore down to the crank, 1/2 the jug, clutch and piston and of course the dreaded bearing. had a bad expirence with the clutch not coming off and stripping almost everything out. i have the clutch bolt out and the washer off going to have it impacted off with the puller from someone up the street, just need to know if there is hope or should i stick the RIP on this one year only rare 3 wheel 1983.

09-26-2012, 07:30 PM	#1
devon Not Yet Wild Join Date: Aug 2012 Location: ohio Posts: 51	crank bearings are nightmares ok, big time help needed this time guys. i have an 83 ezgo with a 244 robins. i seized the bearing in the jug (clutch side) and have no good idea on how to "beat" the jug off the crank. nothing moves and already have the motor tore down to the crank, 1/2 the jug, clutch and piston and of course the dreaded bearing. had a bad expirence with the clutch not coming off and stripping almost everything out. i have the clutch bolt out and the washer off going to have it impacted off with the puller from someone up the street, just need to know if there is hope or should i stick the RIP on this one year only rare 3 wheel 1983.