Re: Scottyb bought a Yamaha
The Alltrax XCT requires the blue Flex-Mount adapter for this cart. The Yamaha Moric controller is a 3 bolt mount... The mount is included with the controller. So I followed instructions, putting the 4 self locking nuts in the backside and covering with scotch tape so they don't fall out.
Make sure the Alltrax name was right side up I screwed it to the 3 original holes in the OEM mount plate.
Here is a look at the Flex-mount adapter, the 400 controller with the fan kit installed, and the fuse, and the ring terminals for the F1 & F2 wires.
You will also need 1/4" spade connectors for the 2 solenoid activation wires if you use the SW180 solenoid.
Installing these connector require special tools, wire cutter/strippers and electrical connector crimpers.
The last pic shows the F wires with the new ring terminals provided by Alltrax per my suggestion, you're welcome. lol
|