Quote:
Originally Posted by Adjake
Is there any way to calibrate the stock led acid rxv State of Charge meter to work with lithium conversion.
|
I'm not sure what you have, but lithium batteries need a shunt to allow full amperage to be read by the coulomb counting meter. If you have an SOC meter that calibrates based on pack voltage, it will not work.
This is a very good meter, but there are other types for less than $50.00. Just make sure what ever you get has a shunt that will be connected to the battery positive terminal.
https://www.renogy.com/500a-battery-monitor-with-shunt/