View Single Post
Old 07-14-2010, 01:12 PM   #5
jjmckay
Not Yet Wild
 
Join Date: Jul 2010
Location: wa state
Posts: 3
Default Re: which cart would be best for gsxr 1100 motor?

Quote:
Originally Posted by DOOmsman View Post
A lot of questions are about installing a snowmobile, atv, motorcycle
engine in carts.
This section will try to give you some information about the pitfalls and
some requirements to do so.
BGW nor any of the contributers to this thread recomend these actions and the individual does so at their own risk.
You will need an engine that turns in the correct direction,CW or CCW.

If you want reverse you will need a cart that has forward and reverse in the trans axle
or a reversing means at the engine.

You will need a clutch that matches your crankshaft or an adapter of some kind.

Consideration for cooling is a must, as is clearance for the intake and exhaust(most two stroke engines have tuned exhausts and run very poorly if modified.

The cart will be fast and should have sound steering and suspension.

Method of starting is a large problem if the stock clutch can not be used.

Our sponsors offer big block kits that often cost less than a conversion ends up costing piecemeal.
__________________
hadnt thought of the cooling yet ur right thats a necessity. reverse not so much. will start looking at the clutch issue too. as far as the cost and time goes.... it will keep me occupied and busy and right now thats worth alot lol
jjmckay is offline   Reply With Quote