Buggies Gone Wild Golf Cart Forum - View Single Post - Extreme Team issues

Pat911 · 01-13-2023, 07:17 PM

From memory they use a Daly BMS but it might have some custom firmware locking it down. I personally don't like the Daly BMS's but they DO work and the quality IS good. My dislike for them is due to other shortcomings, certainly not because they don't work. I believe the issue is with the custom firmware. You may be able to reflash it but that function may be locked down too.

If you're limited in your electrical capability, the easiest thing for you to do is purchase another Daly BMS that isn't locked down which has the same plugs as you already have and just swapping it out. Then we can talk you through configuring the parameters for it. I would also suggest using the new temperature sensors that will come with the new BMS and retiring the ones that are currently in the pack.

You could swap out for a totally different BMS if you think you can handle it as well.

If you still have the old BMS then post close up pictures of any labelling and plugs/connections on it.

Cheers
Pat.

01-13-2023, 07:17 PM	#7
Pat911 Gone Wild Join Date: Dec 2020 Location: Melbourne, Australia Posts: 1,942	Re: Extreme Team issues - post here From memory they use a Daly BMS but it might have some custom firmware locking it down. I personally don't like the Daly BMS's but they DO work and the quality IS good. My dislike for them is due to other shortcomings, certainly not because they don't work. I believe the issue is with the custom firmware. You may be able to reflash it but that function may be locked down too. If you're limited in your electrical capability, the easiest thing for you to do is purchase another Daly BMS that isn't locked down which has the same plugs as you already have and just swapping it out. Then we can talk you through configuring the parameters for it. I would also suggest using the new temperature sensors that will come with the new BMS and retiring the ones that are currently in the pack. You could swap out for a totally different BMS if you think you can handle it as well. If you still have the old BMS then post close up pictures of any labelling and plugs/connections on it. Cheers Pat.