Re: Harley Davidson Golf Cart Clutch
3 7/16 or 1/2 inch nuts ( note they have a spring under each one and once nthe pressure is removed you have 3 balls to contend with. I just relieve the pressure and let them fall out. then you have a 5/8 fine thread nut with keeper. remove and use a puller to remove the outter part of the clutch. then the inner part ( the one that contacts the belt) pay attention to the washers , o rings and felt seal as well. check the brass for wear if good re assemble. turn oil hole to 5 or 7 oclock position and fill
|