Re: Lowering a Club Car DS
Scotty normally DS's only have one front leaf spring on the front with a arms on the top. You jack it up and put it on jack stands. Under the center of the front there is 4 bolts. Undo them and undo the bolts on the king pins that hold the leaf spring on the ends. Once it's out you will see a centering pin with a nut on one side. Take that out and put it in from the other way. After that install the spring upside down. For the back we used some 2" lift/drop blocks from autozone that came with new u bolts. It took a bit of work to get the new u bolts in the rear. Once in we trimmed the u bolts for clearence. That's it hole thing dropped 2 inches. Gives it a great stance. I'll try to find some pics if I can.
|